- | Home |
- Company |
- Contact |
- News |
- S/ware Eng |
- Standards |
- Academic Support |
- Documents |
- Search |
- | Requirements |
- Compilers |
- Validation |
- RTOS |
- Analysis |
- Hardware |
- Software |
- Resources |
- Principals |
- Platform |
CSB7xx-Kit - CSB7xx Development Kit
The CSB7xx-Kit is designed to support all CSB7xx series System On a Module (SOM) boards.
With its built in 4.3" 480 x 272 LCD with Touch and LED Backlight, the CSB7xx-Kit turns any
CSB7xx SOM into a full featured software development platform.
The CSB702 "CSB7xx Base Board" that forms the basis of the CSB7xx-Kit has the following features:
:
-
CSB7xx series CPU Module Compatible 200-Pin SODIMM Socket
-
Integrated 4.3" 480 x 272 LCD Display with 4-Wire Touch and LED Backlight
-
41-Pin Interface to optional CSB909 LCD Display Boards
-
164-Pin Edge Connector for CSB902 I/O Expansion Board or User Customization
-
Mini-B USB Device Connector and Dual USB Host Type-A Connector
-
10/100 Ethernet Transformer/Jack with Power over Ethernet (PoE) Capability
-
DB9 Male Connector for RS232 Debug Serial Port (TXD/RXD)
-
Selectable AC97 and I2S Audio Codecs with HEADPHONE/LINE OUT Jack
-
Single CAN Transceiver Interface via 10-Pin Shrouded Header (if CPU has CAN)
-
20-Pin ARM JTAG Header (PowerPC and Coldfire Support via adapter)
-
Primary 4-Bit SDIO Compliant SD/MMC Socket
-
5.0V @ 4A Power Supply for USB Host, CAN and CSB902 I/O Expansion Board
-
12mm Coin Cell Holder for RTC Battery Backup (RTC on CPU Module)
-
Reset Switch plus Power and Debug Status LEDS
-
Compact Size, 4.75" x 3.975" Stackable with Optional CSB902 or Custom User Board
The optional CSB902 "I/O Expansion Board" provides additional functionality along with the ability to perform hardware development quickly and easilly:
-
164-Pin Edge Connector mates to CSB702 via included CSB902BP2 Backplane
-
3.5mm Audio Jacks for LINE INand MIC IN (Codec is on CSB702)
-
Dual SJA1000 CAN Controllers with 3KV Isolated CAN Transceivers
-
Additional SD/MMC Socket With Multiplexer for SPI or SD mode
-
20mm Coin Cell (CR2032) Holder for Increased RTC Battery Backup Time
-
Three CSB908 I/O Sites for RS232/485, S-Video, PoE, Battery Charging and more
-
72-Pin Dual Row .1" Header with CPU Address, Data and Control
-
CSB902 Photos - Top, Bottom, Stacked with CSB702 Right, and Left
Additional information: CSB7xx-Kit Datasheet and CSB7xx-Kit Hardware Reference Manual.
CSB702
The CSB702 Base Board forms the basis of the CSB7xx-Kit. It has the following features:
-
CSB7xx series CPU Module Compatible 200-Pin SODIMM Socket
-
Integrated 4.3" 480 x 272 LCD Display with 4-Wire Touch and LED Backlight
-
41-Pin Interface to optional CSB909 LCD Display Boards
-
164-Pin Edge Connector for CSB902 I/O Expansion Board or User Customization
-
Mini-B USB Device Connector and Dual USB Host Type-A Connector
-
10/100 Ethernet Transformer/Jack with Power over Ethernet (PoE) Capability
-
DB9 Male Connector for RS232 Debug Serial Port (TXD/RXD)
-
Selectable AC97 and I2S Audio Codecs with HEADPHONE/LINE OUT Jack
-
Single CAN Transceiver Interface via 10-Pin Shrouded Header (if CPU has CAN)
-
20-Pin ARM JTAG Header (PowerPC and Coldfire Support via adapter)
-
Primary 4-Bit SDIO Compliant SD/MMC Socket
-
5.0V @ 4A Power Supply for USB Host, CAN and CSB902 I/O Expansion Board
-
12mm Coin Cell Holder for RTC Battery Backup (RTC on CPU Module)
-
Reset Switch plus Power and Debug Status LEDS
-
Compact Size, 4.75" x 3.975" Stackable with Optional CSB902 or Custom User Board
-
164-Pin Edge Connector mates to CSB702 via included CSB902BP2 Backplane
-
3.5mm Audio Jacks for LINE INand MIC IN (Codec is on CSB702)
-
Dual SJA1000 CAN Controllers with 3KV Isolated CAN Transceivers
-
Additional SD/MMC Socket With Multiplexer for SPI or SD mode
-
20mm Coin Cell (CR2032) Holder for Increased RTC Battery Backup Time
-
Three CSB908 I/O Sites for RS232/485, S-Video, PoE, Battery Charging and more
-
72-Pin Dual Row .1" Header with CPU Address, Data and Control
-
CSB902 Photos - Top, Bottom, Stacked with CSB702 Right, and Left
CSB902
The CSB902 "CSB702 I/O Expansion Board" provides additional functionality along with
the ability to perform hardware development quickly and easilly:
The CSB902 is an optional add on to the CSB7xx-Kit.
