Contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:.

• Atmel AT91SAM7X development board
• 20-state version of visualSTATE
• IAR Embedded Workbench with a 32KB
version of the IAR C/C++ Compiler
• J-LINK JTAG debugger with USB connector

Atmel AT91SAM7X Development board

• AT91SAM7X256 or AT91SAM7X128 MCU
• USB device port
• DBGU serial communication port
• RS232 serial communication port with RTS/CTS
• JTAG/ICE debug interface connector
• Serial CAN communication ports
• RMII Ethernet 100-base TX with auto MDIX capability
• Buffered analog input and PWM output
• Power LED and general-purpose LEDs
• DataFlash® card slot

• Expansion connector
• Atmel 32 Mbit serial DataFlash® (AT45DB321C-CNC)
• One A/B-type USB cable
• One crossed serial RS232 cable
• One RJ45 crossed Ethernet cable
• Universal input AC/DC power supply with US and EU plug adapter

IAR Embedded Workbench® for ARM i s an Integrated Development Environment with a complete and easy-to-use set of C/C++ cross compiler and debugger tools for professional embedded applications.

• KickStart 32KB IAR C/C++ Compiler for ARM
• Project manager
• Editor
• Linker and librarian tools
• C-SPY® debugger
• Full integration with IAR J-Link

Complete upgrade path available from IAR Systems.

J-Link debugger

IAR J-Link is a small ARM JTAG hardware debug probe; it connects via USB to the PC host running Windows. IAR J-Link integrates seamlessly into IAR Embedded Workbench for ARM and is fully plug-and-play compatible:

• Any ARM7/ARM9 core supported, including Thumb mode
• Download speed up to 600 KB/sec *
• DCC speed up to 800 KB/sec *
• Seamless integration into IAR Embedded Workbench
• No power supply required, powered through USB
• Max. JTAG speed 12 MHz
• Automatic core recognition
• Auto speed recognition
• All JTAG signals can be monitored, target voltage can be measured
• Support for multiple devices on scan chain
• Fully plug and play compatible
• 20-pin standard JTAG connector
• Optional adapter for 5V targets available
• USB and 20-pin flat cable included
• Wide target voltage range: 1.2V - 3.3V

* Measured with ARM7 at 50 MHz, 12MHz JTAG speed.t tremulus.